SUSPENSION & TOWING SOLUTIONS
TOYOTA LANDCRUISER LC78 SERIES
3900KG GVM UPGRADE
03/2007 - 08/2022
The Lovells 3900kg GVM Upgrade Kit will suit any vehicle owner with a need to carry additional loads of up to 600kg over the original GVM rating: this includes Government departments, mining companies, farmers, tradesmen, large and small businesses, even individuals.
LOVELLS RATINGS
P/N TOYKIT062-GVM
LOVELLS Front Axle 1540kg
__________________________
LOVELLS Rear Axle 2360kg
__________________________
LOVELLS GVM 3900kg
__________________________
​
LOVELLS Towing Capacity 3500kg
__________________________
LOVELLS GCM 7400kg
__________________________
ORIGINAL EQUIPMENT
RATING
OE GVM - Workmate Model 3300kg
__________________________
​
OE GVM - GXL Model 3330kg
__________________________
​
OE Towing Capacity 3500kg
__________________________
OE GCM 6800kg
__________________________
KIT COMPONENTS
-
2 x Lovells heavy duty front coil springs.
-
2 x Lovells heavy duty rear leaf springs.
-
2 x Lovells front gas legend twin tube shock absorbers.
-
2 x Lovells rear gas legend twin tube shock absorbers.
-
3 x Lovells urethane bush kits to suit leaf spring eyes and shackles.
-
4 x Lovells hi-tensile U-bolts.
-
2 x Lovells greasable shackles.
-
2 x Lovells greasable pins.
-
2 x Lovells mudflaps.
-
1x Federal SVI (Secure Vehicle Identification Placard) with revised GVM and upload onto the Federal RAV System for Pre-Registration vehicles only.
-
1 x Tyre loading placard (Decal) with revised axle capacities.
-
1 x GVM upgrade owners manual.
-
1 x Fitting instruction manual.
New vehicles must be fitted prior to first registration for Second Stage Manufacture/Federal Compliance Plate Approval.
Vehicles which are already registered can be fitted with a GVM kit under individual State or Territory Compliance - Please contact Lovells for further detail as each state legislation differs with compliance procedures and GCM revision acceptance.
​
Only Lovells Automotive Systems Authorised fitters are approved to fit the GVM kit and Lovells endorsed engineering signatories are approved to inspect State Compliance modified vehicles.
​
Please contact us for your nearest Authorised Fitter.
LOVELLS GVM UPGRADE KIT
HOW TO FIT
LOVELLS GVM UPGRADE KIT
SPECIAL CONDITIONS
When fitting a Lovells GVM kit to these vehicles, the vehicle must have a minimum Tyre Load Index of 114 and Speed Rating of 'L' to remain compliant.
LOVELLS GVM UPGRADE KIT
COMPLIANCE OPTIONS
State Compliance - Post Registration
Vehicles which are already registered cannot be fitted under federal approval. In some states of Australia, Lovells can offer State compliance for vehicles already registered in accordance to State Legislation and approved by a Lovells endorsed engineering signatory.
​
The Lovells GVM upgrade kit has been approved by the Department of Infrastructure, Transport, Regional Development and Communications (compliance plate approval no. 25742) and will help to keep your vehicle legal.
​
Gross Combination Mass GCM increases may not be available in all States.
​
For more information please contact your nearest Lovells GVM Installer.