top of page
ISUZU MY12

ISUZU GVM UPGRADE KIT COMPONENTS
D-MAX MY12 SERIES

3600KG GVM UPGRADE

  • 2 x Lovells heavy duty front coil springs.

  • 2 x Lovells heavy duty rear coil springs.

  • 2 x Lovells front gas legend twin tube shock absorbers.

  • 2 x Lovells rear gas legend twin tube shock absorbers.

  • 3 x Lovells urethane bush kits to suit leaf spring eyes and shackles.

  • 4 x Lovells hi-tensile U-bolts.

  • 2 x Lovells greasable shackles.

  • 2 x Lovells greasable pins.

  • 2 x Lovells mudflaps.

  • 2 x CAT 6 compliant Indicators.

  • 1 x Tyre loading placard (Decal) with revised axle capacities.

  • 1 x GVM upgrade owners manual.

  • 1 x Fitting instruction manual.

LovellsLogo3d2.png
ISUZU MY21

ISUZU GVM UPGRADE KIT COMPONENTS
D-MAX MY21 SERIES

3600KG GVM UPGRADE

  • 2 x ​Lovells heavy duty front coil springs.

  • 2 x Lovells heavy duty rear coil springs.

  • 2 x Lovells front gas legend twin tube shock absorbers.

  • 2 x Lovells rear gas legend twin tube shock absorbers.

  • 3 x Lovells urethane bush kits to suit leaf spring eyes and shackles.

  • 4 x Lovells hi-tensile U-bolts.

  • 2 x Lovells greasable shackles.

  • 2 x Lovells greasable pins.

  • 2 x Lovells mudflaps.

  • 2 x CAT 6 compliant Indicators.

  • 1 x Federal SVI (Secure Vehicle Identification Placard) with revised GVM and upload onto the Federal RAV System for Pre-Registration vehicles only. 

  • 1 x Tyre loading placard (Decal) with revised axle capacities.

  • 1 x GVM upgrade owners manual.

  • 1 x Fitting instruction manual.

3600KG GVM COOLING UPGRADE

  • 2 x Lovells heavy duty front coil springs.

  • 2 x Lovells heavy duty rear coil springs.

  • 2 x Lovells front gas legend twin tube shock absorbers.

  • 2 x Lovells rear gas legend twin tube shock absorbers.

  • 3 x Lovells urethane bush kits to suit leaf spring eyes and shackles.

  • 4 x Lovells hi-tensile U-bolts.

  • 2 x Lovells greasable shackles.

  • 2 x Lovells greasable pins.

  • 2 x Lovells mudflaps.

  • 2 x CAT 6 compliant Indicators.

  • 1 x Lovells Radiator Closemesh.

  • 1 x Federal SVI (Secure Vehicle Identification Placard) with revised GVM and upload onto the Federal RAV System for Pre-Registration vehicles only. 

  • 1 x Tyre loading placard (Decal) with revised axle capacities.

  • 1 x GVM upgrade owners manual.

  • 1 x Fitting instruction manual.

New vehicles must be fitted prior to first registration for Second Stage Manufacture/Federal Compliance Plate Approval.

Vehicles which are already registered can be fitted with a GVM kit under individual State or Territory Compliance - Please contact Lovells for further detail as each state legislation differs with compliance procedures and GCM revision acceptance.

​

Only Lovells Automotive Systems Authorised fitters are approved to fit the GVM kit and Lovells endorsed engineering signatories are approved to inspect State Compliance modified vehicles.

​

Please contact us for your nearest Authorised Fitter.

LOVELLS GVM UPGRADE KIT
HOW TO FIT

LovellsLogo3d2.png

LOVELLS GVM UPGRADE KIT
SPECIAL CONDITIONS

When fitting a Lovells GVM kit to these vehicles, the vehicle must have a minimum Tyre Load Index of 116 and Speed Rating of 'Q' to remain compliant.

LovellsLogo3d2.png

LOVELLS GVM UPGRADE KIT
COMPLIANCE OPTIONS

State Compliance - Post Registration

Vehicles which are already registered cannot be fitted under federal approval. In some states of Australia, Lovells can offer State compliance for vehicles already registered in accordance to State Legislation and approved by a Lovells endorsed engineering signatory.

​

The Lovells GVM upgrade kit has been approved by the Department of Infrastructure, Transport, Regional Development and Communications (compliance plate approval no. 40257) and will help to keep your vehicle legal.

​

Gross Combination Mass GCM increases may not be available in all States.

​

For more information please contact your nearest Lovells GVM Installer.

GVM - HOW TO
GVM - CONDITIONS
GVM - COMPLIANCE
bottom of page